The rotating beacon at the airport is located on top of a steel tower on the south side of the airport next to the airport terminal building. A rotating beacon projects two beams of light, one white and one green, 180 degrees apart. Identification Lighting: The location of an airport at night is universally indicated by a rotating beacon. These lighting systems, categorized by function, are summarized below. A variety of lighting systems are installed at the airport for this purpose. Airfield LightingĪirfield lighting systems extend an airport’s usefulness into periods of darkness and/or poor visibility. There are approximately 48 marked aircraft tie-down positions on this apron.
This apron is constructed of asphalt and encompasses approximately 44,000 square yards. Approximately 142 marked tie-down positions are located on this apron.Ī north apron area is located northwest of the Runway 9 threshold. This apron is constructed of asphalt and encompasses approximately 65,200 square yards. The main apron area is located south of Runway 9-27. There are two primary aircraft parking aprons at Carson City Airport. Taxiway C, oriented in a northwest-southeast direction, extends between the Runway 9 threshold and Taxiway B. Taxiway B is a north-south oriented taxiway extending between Runway 9-27 and a series of hangars to the north. A high speed taxiway(Alpha 4) exits to Taxiway A and the South Ramp. Five entrance/exit taxiways connect Taxiway A and Runway 9-27. Taxiway A and D are 50 feet wide and located 300 feet from the Runway 9-27 center line. Taxiway A and D are full-length parallel taxiways providing access to both ends of Runway 9-27.
0 kommentar(er)
